A Garden Hose is an item many people have in their homes to help wet their flowers and maintain its beauty. That garden hose usually works with pressure, which means with some processes, you can use it as a pressure washer. How? This article is your step-by-step guide to converting a garden hose into a pressure washer.

Check garden hose properly for any defects

Turning the garden hose into a pressure washer is always an exciting idea that will satisfy you if you get it right. But the process is not a walkover. You will need a lot of patience and calmness to follow through with the procedure correctly. The first thing you need to check is the garden hose. You may spend more than a day or a full day trying to fix the garden hose to work as a pressure washer. Hence, it will be very painful that you to go through that stress and find out it can not work. If your garden hose has a defect and you find out later, it can be very painful. You need to check your garden hose for any holes, leakages, and other defects on the body of the garden hose. If there are any defects, you may need to work on the garden hose to ensure it is in good condition. Also, you may need to change the hose if it is awful.

Make a list of materials needed

Your garden hose is not going to turn into a pressure washer with magic. You will need some materials to ensure the garden hose can act as a pressure washer. The idea of a pressure washer is to wash with a lot of pressure. The pressure coming from the hose pump may be okay, but you need materials like a spray gun and nozzle, amongst others, to control and direct the pressure well. The best thing is to get the list of materials needed

Buy all of the materials in your list

In your list of materials needed for the conversion, items like rubber materials, glue, and screws, amongst other things. These materials are not exactly compulsory because you may have had some at home beforehand. The primary material needed is the hose and nozzle. Ensure that the materials you are getting are of the same texture and size as the garden hose.

Set up and connect your garden hose with the materials

After checking your hose and materials, the remaining task is to get the hose and materials connection right. This task is usually not so challenging as long as you have the right equipment and material. Your spray gun or nozzle comes in different sizes, and each one of these sizes working together is an impossibility. If you have the right size, the connection will be more plug and play. Because the garden hose has been in use for quite a while, the end can have some irregularities. You can use a knife to cut it carefully, and give it an even shape. That way, you will only need to connect it to your nozzle.

Conclusion

After connecting the hose to the nozzle, you need to recheck your connections and ensure there are no leakages. After that, you can test the connection with a little supply of water.